CN1 High preeision Compact power press
is widely used for metal sheet punching, shaping,extending and processing,such as for the industries of traffic vehicles ,timepieces, household electric appliances,stationary, manual tools hardware,as well as computers. At same time, equipped with automatic feeder, it can be used for automatic conveying in assemble line.
● high rigidity
high rigidity , high-precision frame, with welded steel board and heat treated, eliminate inner tension of press.
● Balance centre of gravity
The transmission centre is in accodance with the centre of the whole machine, ensure the accurate and stability in pressing.
● Safe and reliable operation
High-sensitive clutch/braking added international top double electromagnetic valve and overloading protection device, can guarantee the accuracy and safety for sild board running and stopping.
The precision of machine adjusting is up to 0.1mm,safer and quick in production adjusting
● High-precision
The abrasive sections of crankshaft, gears, gearshaft are treated by hardening heat treatment adn followed milling processing,with high abrasion resistant and balance performance,as well as stable performances.Ensure quality and using life of Punch.
● Automatiztion Processing
Can equip all automatic feeders for automatization production,reduce the cost,promote efficiency.
High sensitive overloading protection device 高感度过负荷保护装置
Accessories 配置
配置 | Accessories | Standard标准 |
油压式超载保护装置 | Hydraulic Over-load Protector | ○ |
手动式滑块调整装置(CNl—60及60以下) | Slide Adjust Device( CN1 below 60) | ○ |
电动式滑块调整装置(CNl—60以上) | Slide Adjust Device(CN1 60 or more) | ○ |
机械式模高指示器(CNl—60及60以下) | Die Height Indicator(CN1 below 60) | ○ |
电动式模高指示器(CNl—60以上) | Die Height Indicator(CN1 60 or more) | ○ |
滑块及模具平衡装置 | Balance Device | ○ |
电子式旋转凸轮开关 | Rotary Cam Switch | ○ |
电子式曲轴角度速度显示器 | Crank Angle Indicator | ○ |
电源插座 | Power Supply | ○ |
计数器 | Electrical Stroke Counter | ○ |
预裁计数器 | Preset Counter | ○ |
预断计数器 | Preset Counter | ○ |
空气源接头 | Air source Receptacle | ○ |
二度落保护装置 | Over-run Safety Device | ○ |
维护工具及工具箱 | Maintenance Tool Box | ○ |
使用说明书 | Operation Manual | ○ |
配置 | Accessories | Optional选配 |
电动式黄油润滑装置 | Grease Pumb | ○ |
气压模垫装置 | Pneumatic Die Cushion Device | ○ |
变频器 | Inverter | ○ |
脚踏开关 | Foot Switch | ○ |
快速换模装置(举模器、夹模器或移模臂) | Quick Die Change Device (Die Lifter, Clamp And Die Arm Sepjes ) | ○ |
滑块顶料装置 | Slide Knock-out Device | ○ |
误送检测装置 | Misfeed Detection Consent | ○ |
防震脚 | Anti Vibration Press Mount | ○ |
光电保护装置 | Photo-electronic Safety Device | ○ |
送料机(空气、机械及NC各类) | Feeder | ○ |
料架 | Uncoiler | ○ |
矫平机 | Leveler | ○ |
机械手 | Mechanism Hand | ○ |
模具照明装置 | Die Room Light | ○ |
Technical parameters
MODEL | CN1-25 | CN1-35 | CN1-45 | CN1-60 | |||||||||
Item | S | H | L | S | H | L | S | H | L | S | H | L | |
Capacity | ton | 25 | 35 | 45 | 60 | ||||||||
Rated Tonnage point | mm | 3.2 | 2.3 | 3.2 | 3.2 | 2.3 | 3.2 | 3.2 | 2.3 | 3.2 | 4 | 2.3 | 4 |
Stroke Length | mm | 50 | 35 | 80 | 60 | 40 | 90 | 70 | 50 | 110 | 80 | 55 | 130 |
Stable Speed | s.p.m | 100 | 135 | 75 | 100 | 135 | 80 | 95 | 130 | 80 | 90 | 120 | 70 |
Speed Changing | s.p.m | 75-140 | 95-185 | 70-110 | 70-135 | 90-180 | 50-95 | 65-130 | 85-175 | 50-95 | 60-120 | 80-165 | 40-85 |
Die Height | mm | 245 | 250 | 230 | 250 | 260 | 235 | 255 | 265 | 275 | 275 | 287.5 | 305 |
Maximum Counterbalancer Capacity | Kg | 300 | 300 | 300 | 300 | ||||||||
Slide Ajustment | mm | 50 | 50 | 60 | 70 | ||||||||
Bolster Area | mm2 | 720×320 | 780×340 | 850×360 | 850× 440 | 900×400 | 900× 520 | ||||||
Bolster Thickness | mm | 70 | 70 | 90 | 90 | ||||||||
Slide Area(L.RXF.B.) | mm2 | 350×300 | 380×320 | 430×350 | 500×400 | ||||||||
Air Pressure | Kg/cm2 | 6 | 6 | 6 | 6 | ||||||||
Stable Speed | HP×p | 3×4 | 3×4 | 5×4 | 5×4 | ||||||||
Speed Changing | HP×p | VS 5×4 | VS 5×4 | VS 7.5×4 | VS 7.5×4 | ||||||||
Slide Adjusting Motor | HP×p | 手动manual operation | 手动manual operation | 手动manual operation | 手动manual operation | ||||||||
Precision | GB(JIS)1 class1级 | GB(JIS)1 class1级 | GB(JIS)1 class1级 | GB(JIS)1 class1级 | |||||||||
Die Cushion | - | - | - | - | |||||||||
Air Pressure | Kg/cm2 | - | - | 6.95 | 6.55 | ||||||||
Die Cushion Capacity | ton | - | - | 2.6 | 3.6 | ||||||||
Pad Area(L.RXF.B.) | mm | - | - | 335×230 | 350×235 |
Wide range of applications
Europe and Thailand produced by stamping equipment is widely used in automobile manufacturing, electronics manufacturing, electrical appliance manufacturing, instrumentation, medical equipment, hardware and other industries.
机种 | CN1-25 | CN1-35 | CN1-45 | CN1-60 | CN1-80 | CN1-110 | CN1-160 | CN1-200 | CN1-260 |
T型槽型式 | C | C | C | A | A | B | B | B | B |
T型槽条数 | 3 | 3 | 3 | 3 | 3 | 5 | 5 | 5 | 5 |
模垫销孔数目 x 孔径 | - | - | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | |
c×d | - | - | 75×85 | 75×100 | 75×75 | 90×90 | 100×100 | 100×100 | 100×100 |
b1 | 120 | 120 | 120 | 150 | 150 | 250 | 300 | 300 | 300 |
b2 | - | - | - | - | - | 150 | 150 | 150 | 150 |
e×f | 260×130 | 280×140 | 280×140 | 320×160 | 360×180 | 400×200 | 440×220 | 480×240 | 520×260 |
R | 20 | 20 | 20 | 20 | 30 | 30 | 30 | 30 | 30 |
g | 400 | 400 | 400 | 420 | 480 | 480 | 520 | 560 | 580 |
h | 340 | 350 | 350 | 370 | 340 | 530 | 530 | 680 | 700 |
机种 | CN1-25 | CN1-35 | CN1-45 | CN1-60 | CN1-80 |
滑块板面积(左右x前后) | 350×300 | 380×320 | 430×350 | 500×400 | 560×460 |
T型槽型式 | C | C | C | A | A |
T型槽条数 | 2 | 2 | 2 | 2 | 2 |
模柄孔径 φd | φ38 | φ38 | φ38 | φ50 | φ50 |
b3 | 100 | 100 | 125 | 125 | 150 |
b4 | - | - | - | - | - |
机种 | CN1-110 | CN1-160 | CN1-200 | CN1-260 |
滑块板面积(左右x前后) | 650×520 | 700×580 | 850×650z | 920×700 |
T型槽型式 | B | B | B | B |
T型槽条数 | 2 | 4 | 4 | 4 |
模柄孔径 φd | φ50 | φ65 | φ65 | φ65 |
b3 | 150 | 150 | 300 | 300 |
b4 | - | 150 | 150 | 150 |
机种 | CN1-25 | CN1-35 | CN1-45 | CN1-60 | CN1-80 | ||||||||||
型式 | S | H | L | S | H | L | S | H | L | S | H | L | S | H | L |
A | 1050 | 1190 | 1358 | 1382 | 1493 | 1565 | |||||||||
B | 810 | 840 | 870 | 980 | 1120 | ||||||||||
C | 2070 | 2210 | 2345 | 2555 | 2805 | 2865 | |||||||||
D | 720 | 780 | 850 | 900 | 1000 | ||||||||||
E | 320 | 340 | 440 | 520 | 460 | 600 | |||||||||
F | 350 | 380 | 430 | 500 | 560 | ||||||||||
G | 300 | 320 | 450 | 400 | 460 | ||||||||||
H | 800 | 800 | 800 | 800 | 833 | ||||||||||
I | 330 | 345 | 390 | 440 | 400 | 380 | 490 | ||||||||
J | 478 | 502 | 510 | 534 | 598 | ||||||||||
K | 165 | 175 | 230 | 270 | 240 | 310 | |||||||||
L | 830 | 960 | 1118 | 1166 | 1233 | 1305 | |||||||||
M | 680 | 710 | 740 | 830 | 930 | ||||||||||
N | 600 | 630 | 330 | 730 | 830 | ||||||||||
O | 1200 | 1340 | 1508 | 1532 | 1683 | 1755 | |||||||||
P | 332 | 332 | 332 | 332 | 401 | ||||||||||
Q | 1378 | 1385 | 1378 | 1413 | 1355 | 1413 | |||||||||
R | 723 | 728 | 703 | 703 | 759 | ||||||||||
S | 1341 | 1466 | 1668 | 1702 | 1806 | ||||||||||
T | 2262 | 2369 | 2628 | 2781 | 2918 | 2974 |
机种 | CN1-110 | CN1-160 | CN1-200 | CN1-260 | |||||||||||
型式 | S | H | L | S | H | l | xl | S | H | L | XL | S | H | L | XL |
A | 1700.5 | 1770.5 | 1935 | 2000 | 2162.5 | 2225 | 2330 | 2430 | |||||||
B | 1240 | 1360 | 1520 | 1580 | 1700 | 1800 | |||||||||
C | 2965 | 3030 | 3385 | 3520 | 3545 | 3762 | 3830 | 3855 | 4205 | 4290 | 4355 | ||||
D | 1150 | 1250 | 1350 | 1400 | 1500 | 1500 | 1750 | ||||||||
E | 520 | 680 | 600 | 760 | 680 | 820 | 700 | 900 | |||||||
F | 650 | 700 | 850 | 920 | |||||||||||
G | 520 | 580 | 650 | 700 | |||||||||||
H | 840 | 915 | 1020 | 1100 | |||||||||||
I | 430 | 410 | 530 | 480 | 455 | 650 | 700 | 560 | 530 | 650 | 700 | 640 | 600 | 750 | 840 |
J | 680 | 750 | 850 | 910 | 950 | 1050 | |||||||||
K | 270 | 350 | 335 | 390 | 350 | 420 | 390 | 460 | |||||||
L | 1460 | 1531 | 1635 | 1700 | 1813 | 1875 | 1790 | 1890 | |||||||
M | 1050 | 1180 | 1320 | 1350 | 1470 | 1570 | |||||||||
N | 950 | 1070 | 1190 | 1250 | 1350 | 1450 | |||||||||
O | 1891 | 1961 | 2125 | 2190 | 2353 | 2415 | 2520 | 2620 | |||||||
P | 401 | 401 | 401 | 401 | |||||||||||
Q | 1470.2 | 1495 | 1600 | 1745 | 1630 | 1618 | 1683 | 1553 | 1630 | 1628 | |||||
R | 760 | 812 | 772 | 842 | |||||||||||
S | 2137 | 2426 | 2695 | 2698 | 2703 | 2851 | |||||||||
T | 3239 | 3304 | 3477 | 3632 | 3664 | 3949 | 4014 | 4069 | 4402 | 4457 | 4522 |
PRODUCTS
- CN1 High preeision Compact power press
- CH1 Series High speed Precision Compact Power pres
- SN1 Series Semi-Straight Side High Precision press
- CN2 Series Donble Crank press
- TNX STRAIGHT Side Double Crank press
- TN1 Series Colunar Straight single crank press
- TK1 Toggle press
- TN2 Two-point press
- TN4 Four-point press
- TH2 closed type high speed precision press
- SH1 series of semi closed type high precision high-speed punch
- SL1 series of semi closed type high precision connecting rod punch
- TH1 closed high precision high-speed punch
- Single Crank Precisionsteel Frame Press