TN1 Series Colunar Straight single crank press
Columnar straight punch a single crank press Universal, a high-rigid body and good accuracy, could be applied to cutting, punching,forming,such as the extension of processing,commonly used in car locomotive,hardware and home appliances products factory.
· Thepillar-type integral machine body without any body opening phenomenon like as C-type press.
· Further promote the precision of processing,increase the additional value.
· Improve the operartional performance and safety in the real area of press.
· Better machina body rigidity,less vibration and noise,better operation condition.
Accessories:
配置 | Accessories | Standard标准 |
油压式过载保护装置 | Hydraulic Over-load Protector | ○ |
电动式滑块调整装置 | Slide Adjust Device | ○ |
电动式模高指示器 | Die Height Indicator | ○ |
滑块及模具平衡装置 | Balance Device | ○ |
电子凸轮开关 | Rotary Cam Switch | ○ |
曲轴角度速度显示器 | Crank Angle Indicator | ○ |
电源插座 | Power Supply | ○ |
计数器 | Electrical Stroke Counter | ○ |
预裁计数器 | Preset Counter | ○ |
预断计数器 | Preset Counter | ○ |
空气源接头 | Air source Receptacle | ○ |
二度落保护装置 | Over-run Safety Device | ○ |
维护工具及工具箱 | Maintenance Tool Box | ○ |
使用说明书 | Operation Manual | ○ |
集中式机油润滑 | ○ |
配置 | Accessories | Optional选配 |
电动式黄油润滑装置 | Grease Pumb | ○ |
气压模垫装置 | Pneumatic Die Cushion Device | ○ |
变频器 | Inverter | ○ |
脚踏开关 | Foot Switch | ○ |
快速换模装置 (举模器、夹模器或移模臂) | Quick Die Change Device (Die Lifter, Clamp And Die Arm Sepjes ) | ○ |
滑块顶料装置 | Slide Knock-out Device | ○ |
误送检测装置 | Misfeed Detection Consent | ○ |
防震脚 | Anti Vibration Press Mount | ○ |
光电保护装置 | Photo-electronic Safety Device | ○ |
送料机(空气、机械及NC各类) | Feeder | ○ |
料架 | Uncoiler | ○ |
矫平机 | Leveler | ○ |
机械手 | Robot | ○ |
模具照明装置 | Die Room Light | ○ |
Technical parameters:
机种 | TN1-100 | TN1-150 | TN1-200 | TN1-250 | ||||
H | H | H | S | H | S | |||
吨数 | Capacity | ton | 100 | 150 | 200 | 250 | ||
能力发生点 | Rating Tonnage Point(above B.D.C) | mm | 3 | 3 | 3 | 7 | 4 | 7 |
行程长 | Stroke Length | mm | 25 | 30 | 40 | 250 | 40 | 250 |
行程数 | Stroke Per Minute | spm | 100~200 | 80~180 | 60~130 | 20~45 | 50~110 | 20~45 |
最大模高 | Die Height(S.D.A.U) | mm | 300 | 300 | 350 | 450 | 350 | 500 |
滑块调整量 | Slide Adjustment | mm | 80 | 80 | 100 | 110 | 100 | 120 |
台板面积 | Bolster Area(LR×FB) | mm | 700×700 | 700×700 | 900×900 | 1000×900 | 1000×1000 | 1100×1000 |
滑块面积 | Slide Area(LR×FB×T) | mm | 700×600 | 700×600 | 800×800 | 900×800 | 900×900 | 1000×900 |
机种 | TN1-300 | TN1-350 | TN1-400 | TN1-500 | TN1-600 | ||||
H | S | H | S | S | S | S | |||
吨数 | Capacity | ton | 300 | 350 | 400 | 500 | 600 | ||
能力发生点 | Rating Tonnage Point(above B.D.C) | mm | 4 | 7 | 4 | 7 | 9 | 9 | 9 |
行程长 | Stroke Length | mm | 50 | 250 | 60 | 300 | 300 | 300 | 300 |
行程数 | Stroke Per Minute | spm | 50~100 | 20~45 | 50~100 | 20~40 | 20~40 | 20~40 | 20~40 |
最大模高 | Die Height(S.D.A.U) | mm | 400 | 550 | 400 | 550 | 600 | 650 | 650 |
滑块调整量 | Slide Adjustment | mm | 100 | 150 | 100 | 150 | 150 | 150 | 150 |
台板面积 | Bolster Area(LR×FB) | mm | 1100×1000 | 1100×1000 | 1100×1000 | 1100×1000 | 1200×1100 | 1200×1100 | 1300×1200 |
滑块面积 | Slide Area(LR×FB×T) | mm | 1000×900 | 1000×900 | 1000×900 | 1000×900 | 1100×1000 | 1100×1000 | 1200×1100 |
PRODUCTS
- CN1 High preeision Compact power press
- CH1 Series High speed Precision Compact Power pres
- SN1 Series Semi-Straight Side High Precision press
- CN2 Series Donble Crank press
- TNX STRAIGHT Side Double Crank press
- TN1 Series Colunar Straight single crank press
- TK1 Toggle press
- TN2 Two-point press
- TN4 Four-point press
- TH2 closed type high speed precision press
- SH1 series of semi closed type high precision high-speed punch
- SL1 series of semi closed type high precision connecting rod punch
- TH1 closed high precision high-speed punch
- Single Crank Precisionsteel Frame Press